|
Dépôt Institutionnel de l'Université Ferhat ABBAS - Sétif 1 >
Institut d'Optique et de Mécanique de Précision >
Mémoires de master >
Veuillez utiliser cette adresse pour citer ce document :
http://dspace.univ-setif.dz:8888/jspui/handle/123456789/4702
|
| Titre: | Conception et réalisation d'un dispositif pour essais de cisaillement |
| Auteur(s): | Samra, attafi |
| Date de publication: | 27-nov-2024 |
| Collection/Numéro: | Mémoire de Master; |
| Résumé: | The main objective of this study consists in the design and the realization of a compressive shear test device “CSD”, in order to characterize the composite materials based on jute fiber. "SolidWorks" was used for the design of the device. The CSD should be adapted on the traction- compression machine. it should allow us to perform pure shear tests on cubic specimens of jute/polyester composites with two different orientations [0°]24 and [45°]24. The composite is developed in the LMNM laboratory at IOMP, Sétif, Algeria. A supplementary characterization test by compression was performed.
The comparison between the shear and compression results showed that the compressive stress is three times greater than the shear stress of the tested composites. The dispersion of the measurements taken is very narrow. The reproduction of the tests is practically perfect. |
| URI/URL: | http://dspace.univ-setif.dz:8888/jspui/handle/123456789/4702 |
| Collection(s) : | Mémoires de master
|
Fichier(s) constituant ce document :
|
Tous les documents dans DSpace sont protégés par copyright, avec tous droits réservés.
|
